Pi-hole on Aruba Cloud
Deploy Pi-hole — network-wide DNS filtering and ad-blocking — on Aruba Cloud using Terraform and cloud-init. Pi-hole pairs naturally with the WireGuard example: point your VPN clients at the Pi-hole DNS server and get ad-free browsing everywhere your VPN is active.
Provider version: arubacloud/arubacloud
~> 0.5| Terraform: ≥ 1.9
Introduction
Pi-hole is a DNS sinkhole that blocks ads, trackers, and malicious domains at the network level, before they reach your device. This example provisions a lightweight Pi-hole instance on Aruba Cloud with:
- The smallest available VM (CSO1A2 — 1 vCPU / 2 GB) — Pi-hole is lean
- Pi-hole installed via the official unattended installer
- DNS on port 53 (UDP + TCP) — UDP for standard queries, TCP for large responses
- Admin web UI on port 80 — both access-restricted by
admin_cidr systemd-resolvedstub listener disabled so Pi-hole can own port 53- No DBaaS — Pi-hole stores query logs in SQLite on the boot disk
Best practice: Deploy alongside the WireGuard example. Set
dns_cidrandadmin_cidrto your WireGuard tunnel CIDR (e.g.10.8.0.0/24). Point VPN clients' DNS to the Pi-hole Elastic IP.
Architecture Overview
Infrastructure Created
| Resource | Name pattern | Description |
|---|---|---|
arubacloud_project | pihole-prod | Project container |
arubacloud_vpc | pihole-prod-vpc | Virtual Private Cloud |
arubacloud_subnet | pihole-prod-subnet | Basic subnet |
arubacloud_securitygroup | pihole-prod-vm-sg | Security group |
arubacloud_securityrule | pihole-prod-vm-ssh | SSH ingress |
arubacloud_securityrule | pihole-prod-vm-admin-ui | Admin UI ingress TCP 80 |
arubacloud_securityrule | pihole-prod-vm-dns-tcp | DNS TCP 53 ingress |
arubacloud_securityrule | pihole-prod-vm-dns-udp | DNS UDP 53 ingress |
arubacloud_elasticip | pihole-prod-vm-eip | VM public IP |
arubacloud_blockstorage | pihole-prod-boot | 20 GB boot disk (Performance) |
arubacloud_keypair | pihole-prod-keypair | SSH public key |
arubacloud_cloudserver | pihole-prod-vm | CloudServer VM |
Estimated Monthly Cost
| Resource | Spec | Est. cost/mo |
|---|---|---|
| CloudServer VM | CSO1A2 — 1 vCPU / 2 GB | ~€9 |
| Boot disk | 20 GB Performance | ~€3 |
| Elastic IP | — | ~€3 |
| Total | ~€15/mo |
Requirements
- Terraform ≥ 1.9
- ArubaCloud Terraform Provider
~> 0.5 - An ArubaCloud account with OAuth2 API credentials
- An SSH key pair
Variables
Required
| Variable | Description |
|---|---|
arubacloud_client_id | ArubaCloud OAuth2 client ID |
arubacloud_client_secret | ArubaCloud OAuth2 client secret |
ssh_public_key | SSH public key content |
pihole_password | Pi-hole admin web interface password (min 8 chars) |
Optional
| Variable | Default | Description |
|---|---|---|
app_name | "pihole" | Short name used in all resource names |
environment | "prod" | Environment label |
location | "ITBG-Bergamo" | ArubaCloud region |
zone | "ITBG-1" | Availability zone |
billing_period | "Hour" | "Hour" or "Month" |
vm_flavor | "CSO1A2" | CloudServer flavor |
vm_image | "LU22-001" | Boot disk image (Ubuntu 22.04 LTS) |
vm_disk_size_gb | 20 | Boot disk size in GB |
ssh_cidr | "0.0.0.0/0" | CIDR for SSH |
dns_cidr | "0.0.0.0/0" | CIDR for DNS port 53 — restrict to your VPN tunnel CIDR |
admin_cidr | "0.0.0.0/0" | CIDR for admin UI port 80 — restrict to your VPN tunnel CIDR |
upstream_dns_1 | "1.1.1.1" | Primary upstream resolver |
upstream_dns_2 | "1.0.0.1" | Secondary upstream resolver |
Outputs
| Output | Description |
|---|---|
admin_url | Pi-hole admin web interface URL |
dns_server | IP to use as DNS server on VPN clients |
vm_public_ip | Public IP address of the VM |
ssh_command | SSH command to connect to the VM |
Deployment Instructions
1. Clone and navigate
git clone https://github.com/arubacloud/terraform-arubacloud-examples.git
cd terraform-arubacloud-examples/pi-hole
2. Configure variables
cp terraform.tfvars.example terraform.tfvars
Set pihole_password. In production, also set:
dns_cidr = "10.8.0.0/24" # your WireGuard tunnel CIDR
admin_cidr = "10.8.0.0/24"
ssh_cidr = "203.0.113.42/32"
3. Deploy
terraform init
terraform plan
terraform apply
Bootstrap takes approximately 5–8 minutes (Pi-hole downloads blocklists on first install).
4. Point VPN clients at Pi-hole
terraform output dns_server
Use the output IP as the DNS server in your WireGuard client config:
# In your WireGuard client [Peer] section:
DNS = <output of dns_server>
Or set it as the DNS in your WireGuard server config so all VPN clients use it automatically.
5. Access the admin UI
terraform output admin_url
Log in with pihole_password to view query logs, manage blocklists, and whitelist domains.
Security Recommendations
-
Always restrict
dns_cidrandadmin_cidr. Leaving port 53 open to0.0.0.0/0makes your Pi-hole an open DNS resolver — it will be abused for DNS amplification attacks. Set both CIDRs to your WireGuard tunnel CIDR. -
Do not expose the admin UI publicly. Port 80 should only be reachable from VPN-connected clients.
-
Use Pi-hole with WireGuard. The intended deployment model: WireGuard VPN on the same or adjacent VM provides secure tunnel access, and clients route DNS through Pi-hole. See the WireGuard example.
Upgrade Considerations
Pi-hole upgrades in-place:
ssh ubuntu@$(terraform output -raw vm_public_ip)
pihole -up
No VM replacement needed for Pi-hole version upgrades.
Troubleshooting
Pi-hole not responding to DNS queries
sudo systemctl status pihole-FTL
sudo pihole status
# Check port 53 is listening:
sudo ss -ulnp | grep :53
sudo ss -tlnp | grep :53
Port 53 already in use after install
systemd-resolved stub listener was not disabled. Check:
sudo ss -ulnp sport = :53
cat /etc/systemd/resolved.conf | grep DNSStubListener
sudo systemctl restart systemd-resolved
sudo systemctl restart pihole-FTL
Admin UI not loading
Verify lighttpd is running and port 80 is reachable from your current network:
sudo systemctl status lighttpd
curl -sv http://localhost/admin/